Mr.Sergey AbayevGood service and fast shipping.
Mr.HoqueLily,I am really happy with the film. Good quality with competitive price. Thank you very much for your sincere service.
Mr.HernanLily, I received your goods,it is very good. And thanks for your nice coorperation!
|Place of Origin||Shenzhen,Guangdong Province,China|
|Brand Name||Hunter Men|
|Minimum Order Quantity||100 rolls|
|Packaging Details||2 or 4 rolls /CTN, 1 PE bags/rolls or it's up on your option.|
|Delivery Time||1-15work days|
|Payment Terms||Western Union, L/C, T/T, D/A, D/P,Alibaba|
|Supply Ability||1500rolls per Week|
|Structure||PES Film + Release Paper||Color||Milky White|
|Hot Pressing Temperature(°C)||140-160℃||Processing Time(seconds)||3-15 Seconds|
Iron On Hot Melt Adhesive Film,
Hot Melt 80mic Adhesive Film,
Heat Transfer Adhesive Film
Iron-on Hot Melt Adhesive Film for Heat Transfer Embroidery Patch Appliques
|Color||Milky White||Release Liner||Glassine release paper|
|Melt Flow Index||
|operating Temperature||120℃-160℃||Length||100yards/100meters or it's up on your option|
|Flow Beginning Point||108℃±5℃||Normal Products Specification||100cm (width)*100yards(Length) /roll|
|First Lamination||Second Implanting|
|Mechanical Mold Temperature||120℃-130℃||Mechanical Mold Temperature||140℃-160℃|
|Hot Pressing Time||3-5 seconds||Hot Pressing Time||8-15 seconds|
How To Apply Heatseal (Iron-on) Patches to Garments:
1) Wash fabric first. Fabric softener should not be used.
2) Set iron to cotton setting. Do not use steam, and remove water from iron.
3) Lay your garment out on a hard, heat tolerant surface. A padded ironing board is not hard enough. Try placing a cutting board above padding.
4) Place heatseal side of patch onto fabric in desired placement area. Iron design for approximately 30-60 seconds, applying pressure. Do not move iron side to side as this may cause design to shift. Heavier fabrics may require more time, and lighter fabrics may require less time.
5) Allow time to cool, then make sure entire surface area is applied to fabric. If all pieces did not adhere, reapply heat for an additional 20-30 seconds. Allow to cool.
6) Turn garment inside out and apply iron to back of design area for approximately 30 seconds. Wait 48 hours before washing, and turn garment inside out when doing so.
HT03 is widely used in adhesion embroidery trademark,laser registering,shoes,fabric composites,shield materials,sport equipment,package,box,clothing, shose and so on.
|Embroidery Patchs||Shoes Weaving Mark||PVC logos||Aluminum||Sport Ware|