Product Details:
Payment & Shipping Terms:
|
Type: | HT05 | Raw Material: | Copolyamide |
---|---|---|---|
Thickness: | 150mic | Width(mm): | 50cm |
Length: | 100 Yards | Melting Point(°C): | 80℃ |
Hot Pressing Temperature(°C): | 140-160℃ | Washing Temperature: | 60℃ |
High Light: | Hot Melt Adhesive Film Double Side,150mic Hot Melt Adhesive Film,PA Hot Melt Adhesive Film |
Double Sided PA 150mic Hot Melt Adhesive Film Glue Film Adhesive Sheets For Embroidery Patch
Description:
Hunter-Men HT05 (PA Hot Melt Adhesive Film )is a thermoplastic copolyamide adhesive product, and it structure is double-layer, the one laye is release paper, the other layer is hot melt adhesive film,because of its high bonding strength and good resistance to heat,cold,oil,chemicai,No smell no spot,fast curing, it widely used for Leather,fabric,plastic,metal stickiness.
Features:
Excellet water wash resistance,
1.dry cleaning resistance,
2.solvent resistance,
3.high&low temperature resisitance.
Applications:
It is often used in the bonding of textiles,leather,foam,paper,metals,and polymers for electrical,mechanical,automotive,furniture and other industury.
Physical Characteristics:
Color | Sky Blue | Release Liner | Glassine release paper |
Density | 1.2±0.02g/cm³ | Conventional thickness | 150mic |
Melt Flow Index |
33±3g/10min ASTMD1238-04 |
Conventional Width | 50cm |
operating Temperature | 140℃-160℃ | Length | 100yards |
Flow Beginning Point | 80℃ | Normal | 50cm (width)*100yards(Length) |
HOW TO USE:
Hot melt adhesive film have 2 layers(release paper +hot melt adhesive film)
1. Put hot melt adhesive film on the bonding material A, and release paper layer is up, hot melt adhesive film layer is down,the sequence: release paper +hot melt adhesive film+material A.
2.Put release paper +hot melt adhesive film+material A in hot pressure machine,and hot pressing on the release paper side
3.After that cooling, peel out the release paper
4.Put material B on the hot melt adhesive film,,the sequence: material A+hot melt adhesive film+material B, then hot pressing again
Note: Due to the different bonding materials have different heat-shielding performance, the operation parameters in the technical data are only for reference. The specific hot pressing temperature, pressure and time shall be adjusted according to the different bonding materials, operating equipment and process.(Please don’t use steam when you operate by flatiron.)
May Your Interested:
Hot Melt Adhesive Film For Embroidery Patch |
|||
Type | HT03 | HT01-2000 | HT01 |
Color | Milky White | Transparent | Transparent |
Bottom Materials | Single Silicon Glassine Release Paper | ||
Melt Point(℃) | 108 | 85 | 100 |
Pressing Temperature(℃) | 120-160 | 110-150 | 120-170 |
Adhesive Strengh(N/1c㎡) | >80 | >80 | >70 |
Normal Thickness | 0.06mm,0.08mm,0.1mm, 0.12mm,0.15mm | ||
Normal Specification (width*length) | 50cm*100YDS | 48cm*100YDS | 48cm*100YDS |
Dry Cleaning | * | NO | NO |
Washable | |||
40(℃) | *** | *** | *** |
60(℃) | ** | * | NO |
80(℃) | * | NO | NO |
Contact Person: Lily
Tel: 86-15817445470