Payment & Shipping Terms:
|Raw Materals:||Acrylic Pressure Sensitive Hot Melt Film||Substrate Material:||Release Paper Or PET|
|Usage:||Embroidery Badges And Patches||Color:||Transparent|
|Hot Pressing Temperature(°C):||100-150℃||Processing Time(seconds):||3-8 Seconds|
48CM Width Single Side Adhesive Film,
PET Substrate Single Side Adhesive Film,
180mic Acrylic Self Adhesive Film
Hot Melt Adhesive Film Single Side With Acrylic Self Adhesive Film Sheets
It is a self-adhesive hot melt film. Double-layer film structure: one layer is hot-melt adhesive (it's haven't viscosity at room temperature, it needs to be warmed and glued), and the other layer is pressure sensitive adhesive of propylene acid (self-adhesive layer have viscosity at room temperature, release paper).Self-adhesive layer can be below 140 degrees temperature without dropping glue, without losing glue property, and can be repeatedly pasted, in line with European demand indicators.
Development direction and application of HT01-YM is for adhesion in embroidery patches , phone case, handcraft and so on.
|Color||Transparent||Release liner||Glassine release paper|
|Melting point||65-85 (Hunter-men)||Width||48cm|
|Melt Flow Index||75±15g/10min (ASTM D1238-04)||Length||100yards|
|Operating Temperature||93-116℃ (Hunter-men)||Finished Products||48cm*100yards|
|Mechanical Mold Temperature||100℃-130℃|
|Hot Pressing Time||3-5 seconds|
Remarks:The above information and technical support are based on our current knowledgeand experience.They are witout guarantee and legal claim.To obtain the best processing conditions, we suggest customers test the samples before using our products
|Packaging||1PC/PE FILM, 100meters/roll, 1 rolls/CTN, or it's up on the customer's option|
|Storage Conditions||Stored in dry unopened packaging at room temperature at least 2 years.
Contact Person: Lily