Payment & Shipping Terms:
|Structure:||PO Film + Glassine Release Paper||Raw Materials:||Polyolefin|
|Melt Flow Index::||60g/10min ; Condition:ASTMD1238-04(Hunter-Men)||Melt Point:||90-110℃|
|Width(mm):||50cm||Packing:||100 Yards In One Roll|
Polyolefin Hot Melt Adhesive Film,
Hot Melt Adhesive Film 180 Micron,
180 Micron thermoplastic film
White Transparent 180 Micron Polyolefin Hot Melt Adhesive Film For Patches
Hunter-MEN HT01-20A(Po hot melt adhesive film) is a double-layer structure (release paper +hot melt adhesive film)products, it have excellent stickiness for textiles,metals and other materials,the features are non-elastic,washable, transparent and environmentally,so it’s widely used to clothing logos industries.
Operate machine :iron,hot pressing machine or other hot composite machine
|Color||Clear||Release Liner||Single Silicone Release paper|
|Melt Flow Index||
|Flow Beginning Point||110℃||Normal Size /Rolls||
|First Backing Operate||Second Hot Pressure Operate|
|Hot Pressing Temperature||120℃-150℃||Hot Pressing Temperature||140℃-170℃|
|Hot Pressing||1-5seconds||Hot Pressing Time||5-20 seconds|
HOW TO USE:
Hot melt adhesive film have 2 layers(release paper +hot melt adhesive film)
1. Put hot melt adhesive film on the bonding material A, and release paper layer is up, hot melt adhesive film layer is down,the sequence: release paper +hot melt adhesive film+material A
2.Put release paper +hot melt adhesive film+material A in hot pressure machine,and hot pressing on the release paper side
3.After that cooling, peel out the release paper
4.Put material B on the hot melt adhesive film,,the sequence: material A+hot melt adhesive film+material B, then hot pressing again
Note: Due to the different bonding materials have different heat-shielding performance, the operation parameters in the technical data are only for reference. The specific hot pressing temperature, pressure and time shall be adjusted according to the different bonding materials, operating equipment and process.(Please don’t use steam when you operate by flatiron.)
HT01 is for adhesion in garments accessories, footwear, handbags, luggage, embroidery, hot fix and crafts and so on.It's mainly used for packaging paper,carpet,aluminium-plastic panel,embroidery patch.
|Embroidery Patches||Weaving Mark||Aluminum||Glass Drill Handcrafts|
Support Customization Production:
According to customer details demands for new product development, we can offer technical support and production as customer opines.Please contact with us for any about the product questions.
1. Support materials selections.(melt point, hardness,viscosity,colors,size etc.)
2. Support based materials selections.( Film based:PP,PE,PET etc； Paper based: Glassine paper,Coated paper etc.)
3. Support no based materials.
We can tailor hot melt film as your business and demands.
If you have any other questions, please tell us soon, and we will try our best to offer our better service and products for you.
Contact Person: Lily