Hot Melt Adhesive Glue Film For Embroidery Patches Hot Backing Gum

Color	transparent	Release liner	Glassine release paper
Density	0.96±0.02g/cm³	Conventional Thickness	0.05mm ,0.08mm, 0.1mm, 0.12mm,0.15mm,0.18mm
Melting point	90℃	Width	5mm-1480mm
Operating Temperature	130℃-160℃	Conventional Width	480mm,1000mm,1380mm,1480mm
Melt Flow Index	100±10g/10min ; Condition:ASTMD1238-04	Length	100 yards
Washing Resistant Time	40°C/72H	Finished Products Specification	480mm(width)*100yards(len

 

Hot Melt Adhesive Glue Film For Embroidery Patches Hot Backing Gum
Type	HT03	HT01-2000
Color	Milky White	Transparent
Bottom Materials	Single Silicon Glassine Release Paper
Melt Point(℃)	108	85
Pressing Temperature(℃)	120-160	110-150
Adhesive Strengh(N/1c㎡)	>80	>80
Normal Thickness	0.06mm,0.08mm,0.1mm, 0.12mm,0.15mm,0.18mm
Normal Specification (width*length)	50cm*100YDS	48cm*100YDS
Washable
40(℃)	***	***
60(℃)	**	*
80(℃)	*	NO

1. Clean;
2. Envorentment friendly;
3. High efficiency. In the all process, just need a several seconds.
4. Safety. This product is non-solvent and haven't any hidden trouble in your production.
5. Hot melt adhesive film has better fastness than other glue which could be widely used to laminate many materials;
6. Automatic production can be cometure.
7. Portable and easy operattion
8. Reusable. At the film melting,you can use it again and again.
9. Hot melt adhesive film has good dry cleaning, washable, low-temperature resistance, high-temperature resistance and other kinds of good features;
10. Can be used as adhesives and sealants;

FAQ :

1 .How about hot melt adhesive film?
A: It is just a film, and the basic material is release paper. But the film is solid in room temperature, when reach its melt point, it is able to bond other materials, Different materials of hot melt adhesive film have different performances and different usages, we need understand your demands ,then recommend you right products to you.
2.Do you accept OEM or ODM?
Yes ,we accept OEM and ODM, we are professional heat transfer material manufacturer ,having more than 10years experience. able to assist you R&D new products. So if you need bonding some special materials, please don’t hesitate to let us know.
3.How do you transport the products?
If you are not urgent, we usually transport by ship because it is the cheapest way. But for the West Asia area,
we deliver by train because there is no sea to ship. And for samples and urgent cargo, we transport it by air as it is the fastest way .Of course if you have other better idea about transport, we will accept it.
4. May I have your samples?
If you need some sample for reference, please let us know your fully address/ship
mode with courier ,and we will arrange sample for your reference.
5. How long is the lead time?
Sample lead time:3-7 days
Bulk lead time:7-10 days(depends on order quantity)

6. How do I pay for my order?
We accept L/C ,T/T ,Western Union , Paypal , Escrow